Gear news
You are looking at: Home : Gear news

Mountain Equipment's New Clothing!

New for autumn 2008, some serious down plus new hardshell mountain pants.


Posted: 16 September 2008
by Jon

Here's the final look at what's new from Mountain Equipment for this autumn 2008 - we've already shown you the new Kongur MRT mountain rescue jacket and the revamped glove range. Here's the rest.

Hard Shell jackets

Hard shell only really exists as a term because of 'soft shell', so really we're talking conventional waterproof jackets.  We've already told you about the Kongur MRT with its serious outbreak of reflective strips, and the rest of the well-proven range remains pretty much the same.

One welcome change though, is that the Mountain Equipment Tupilak jacket - below - has a revised cut for this winter. When it was introduced a year ago, it looked highly promising - it was a first for ME, cut slimmer than their usual fit and at a genuine 430 grammes for a medium, a very light Gore-Tex Pro Shell top.

Mountain Equipment Tupilak jacket

Unfortunately, something went wrong at the manufacturing stage and the jacket was disproportionately tight across the chest with the armholes cut too high making the jacket restrictive and rendering the pit-zips unuseable. Those issues have been fixed, says ME, which should make it an excellent lightweight jacket. Confirmation once we've tried the latest version.

New Pants

It seems unlikely, but ME has been pantless for a while with their hardshell legwear dominated by salopettes / bibs. They're great for climbers and mountaineers, less conventient for walks, so for this autumn, there are new Gore-Tex and DriLite hardshell mountain pants for serious hill and mountain walkers.

The new Kongur Pant - below left - is made from three-ply Gore-Tex Pro Shell, has three-quarter length water-resistant side zips, articulated knees, a semi-elasticated waist and comes complete with braces. Claimed weight is a very reasonable 390 grammes, price is £180.

ME Kongur and Ogre Pants

If that's a bit rich for you, the new Ogre Pant - right - shares many of the Kongur's design features, but is priced at a more affordable £100. It's made from Drilte Extreme, has three-quarter zips, but with a storm flap cover, and the same active cut with articulated knees. It has brace attachment points, but comes without them.

Down Insulation

The Mountain Equipment guys have been busy on the down clothing front with some seriously warm new kit using 93/7, 700 fill power down.

The Omega Jacket was already in the range, but it's been massively overhauled for autumn. Box-wall baffle construction is now fully welded. That means less down leakage and better water resistance thanks to the lack of stitching. There's a helmet compatible hood, anti-wicking strips at the hems and lots more.

Mountain Equipment Omega jacket

The outer fabric is a new version of Drilite Loft which is a serious 17 grammes per square meter lighter than before. The end result is a jacket designed to work down to -20° or so in alpine conditions, but at 745 grammes, it's lighter than the current Lightline, which is pretty impressive. Price is £250.

Brand new for this autumn is the Vega down jacket. It's a pure, lightweight alpine jacket, which like the Omega, uses top-end 700+ fill power down and the new, lighter Drilte Loft fabric. It's stitch through to save weight and has a water-resistant main zip.

Mountain Equipment Vega jacket

Mountain Equipment says the weight is around 280g lighter than a Lightline - that's sub 500g - but just as warm. Price is £200 and the jacket's also available as a - inevitably more attractive - women's version called the Sigma.

Finally, there's a brand new and rather neat looking basic women's down jacket called the Taiga. It uses the slightly less warm 600+ fill power down in a stitch-through construction with an unusual Ultrasoft shell and an active cut. Weighs 570 grammes, costs £100 for the jacket or £80 for the vest version. Both look very cool in the flesh....

Mountain Equipment Taiga Jacket and Vest

Synthetic Insulation

On the synthetic side of things, the Fitzroy Jacket with its Primaloft insulation is another one that's had a serious overhaul. It's now both warmer and lighter, albeit 15 quid more expensive at £150. It uses the new Drilite Loft fabric and now has a double-layer hood.

Mountain Equipment Fitzroy Jacket

The old version had a number of cold spots due to the way it was constructed, they've beem eliminated for this year, so, for example, cord channels are now insulated as they would be with a sleeping bag. Looks neat too.

Also new, are the Nordland jacket using ME's own Polarloft synthetic filling with a completely windproof and water-resistant microfibre shell featuring pack-compatible handwarmer pockets. Looks like a good fleece replacement option and retails for £80.

The kit above should be in the shops right about now, or by the end of September at the latest. More details at www.mountain-equipment.co.uk.

Previous article
Coniston Walking Festival Incoming
Next article
Motorola's New Hill-Friendly Walkie Talkie


TwitterStumbleUponFacebookDiggRedditGoogle

Related Content


Discuss this story

Vega Jkt. What on earth is the point of a water resistant zipper if the jacket is stitched through. If you are stitching through (creating leak points) to save weight then why add the weight of a coated zipper?????

Further more - did any one look ont the breatability of this driite fabric? Surely welding down products is only beneficial if the fabric can breath at a greater rate than the wearers body can perspirer...if not you have simply place the down in a vapour shield.....

Who is checking these things?!!!!!


Posted: 18/09/2008 at 07:08

Fair comment on the zip, I'd say...

As for the Drilite ME use in down stuff (there's "Loft" for down products, and then the completely different "Plus" and "Extreme" for waterproof gear), I've been using sleeping bags and down jackets in Drilite for years now, and the breathability has never been an issue.  The main point of welding here is so down doesn't get out through the stitching(it may also give weight benefits), there should still be plenty of breathability in the main baffles.

Pete.


Posted: 18/09/2008 at 09:11

Hi guys As the designer, the person responsible for fabric sourcing, and the person that looks at all the fabric test results I guess I am the one you need to speak to. 

The Vega / Sigma is currently our lightest 700+ fill power, helmet compatible hooded, down jacket. You are correct in saying we have used stitch through construction on the Vega / Sigma to save weight. However, other features of the design are based around the intended environment the jacket will be used in and the types of activities the jacket will be used for. As Jon has mentioned in the report, the jacket was designed with Alpine conditions in mind. This means we believe there is a high likelihood that the jacket will be used extensively in and around snow. It is for this reason we have used our water resistant (1.5m hydrostatic head) Drilite fabric and also the W/R zippers. There is not a huge weight penalty for using W/R zippers but you gain valuable protection against water ingress, which great for your down and warmth. We also use the Drilite fabric inside the hood for example so you can put it on over a wet climbing helmet or for when some snow get in the down will not get wet. There is a compromise between weight and protection but we think we have got the balance right for these particular jackets.

 If however you wanted the out and out lightest down jacket from us you would pick something from the Xero range. The Xero Jacket uses the same quality of down, a much lighter shell fabric, which offers a lower level of protection against water ingress (470mm hydrostatic head), stitch through construction, and standard zippers. It does not come with the helmet compatible hood though. We have been using our Drilite Loft fabric successfully for many years (much longer than I have been at Mountain Equipment) across our Extreme sleeping bag and Down clothing ranges. Our new lighter Drilite fabric has been developed specifically for us after 18 months of development with our supplier. It has been tested at a number of independent test houses, including the University of Leeds, and offers the same performance levels as the old Drilite but at a much-reduced weight.  

The Omega Jacket uses welded internal box wall stripping to the inside of the Drilite shell fabric. This does mean there are very narrow strips of a very thin lamination film joining the stripping to the shell. There will be some reduction in breathability in those specific areas but the overall surface area of the film is relatively small compared to the overall fabric surface area. Again this is a compromise between the protection of the down, elimination of down leakage on the majority of seams, and breathability. Other product teams may go in a different direction.

 

I hope that helps answer your questions

Keith Hutcheon - Designer - Mountain Equipment

 

Posted: 18/09/2008 at 10:50

See more comments...
Talkback: Mountain Equipment's New Clothing!

First Name:
Last Name:
Nickname:
Email:
Security Image:
Enter the code shown:

I agree to the site's Terms and Conditions & Code of Conduct: