Brasher Helium XCR -
First Look
|
Price:
£85
|
|
Weight: 780
grammes (pair size 43)
|
|
Features: Trail and fell-running
shoe uses elasticated construction and Tri Fit Technology, 1.2mm
synthetic nubuck upper with mesh panels, new lightweight, three-part
Trail sole unit, Ortholite dual density footbed, Gore-Tex XCR liner.
Full protective rand. Available in both men's and women's versions.
|
What's It
For?
Brasher describes the brand new Helium XCR as 'a performance trail and
fell running shoe', but we think it's just as suitable as a lightweight
walking shoe and we suspect that a lot of Heliums will be used that way.
The Techy
Bits
Lots of technology in the Helium. Visible stuff includes another
incarnation of their TriFit system, in the form of the moulded heel cup
and those external plastic reinforcements linked to the lacing system,
which with the aid of the elasticated upper, is designed to hold
forefoot and heel firmly in place and give stability over rough terrain.
External heel counter ups
stability, small grey pad (lower right) cushions
initial heel strike.
There's a new, trail-running type sole unit too with an EVA pad on the
outside of the heel to soften initial heel strike. The sole unit itself
is a three-part affair with firm-ish cushioning and a moulded stiffener
for lateral control but longitudinal flex.
Last but not least, there's a Gore-Tex XCR liner for waterproofing. The
XCR liner has minimal extra insulation to keep things more comfortable
in warm conditions.
How They
Performed
With previous Brasher shoes we've had real issues with the cavernous
heel, the Helium on the other hand, use a much snugger fit and we had
no problems with heel fit or lifting whatsoever. In fact the
combination of TriFit and elasticated uppers gives a great, glove-like
feel to the shoes, but still with enough forefoot space for medium-wide
British feet.
Underfoot, you can feel the torsional stiffness of the sole unit
kicking in on uneven terrain, where they're far less supple than, say,
a typical Inov-8 shoe. There's also more cushioning in the mid-sole,
which is good for long days, but does make them less intuitively stable
than a pure fell shoe. Not bad though.
And they're not super light. The pay-off for that is a full protective
rand, which should up durability on rough terrain and scree plus an XCR
membrane which is great in damp conditions, but going on past
experience, may feel hot and sweaty on warmer days.
So good lateral stiffness, snug fit, reasonable, firmish underfoot
cushioning - a little firm for really hard terrain maybe - and low
enough for reasonable security on rough ground. The sole unit seems
pretty good too, giving dependable grip on the mix of rock, sand and
soft ground/grass they've encountered so far.
They work pretty well as a trail running shoe, with that good, snug fit
keeping things stable at the heel end of things and a well-anchored
forefoot adding to precision. They're also very decent lightweight
trail-walking shoes.
The only issues we had were that the inside edge of the ankle
cuff occasionally pressed painfully on our ankle bone on uneven ground,
but that's a fit issue and all we can do is advise you to try carefully
before buying as with all outdoors footwear. And then there's the
question mark over Gore-Tex liners and hot weather use.
Very competent trail running and walking shoe from Brasher, though we
wouldn't use it for full on, fell running duties. Fit is untypically
snug, particularly at the heel end of things and grip, stability and
cushioning are fine on the trails. We suspect the Brasher name will put
runners off, but if you're looking for a lightish and stable walking
shoe, that should be tougher than most pure running models, try some
for size.
Buy if
you're looking for a stable, snug-fitting trail walking shoe that can
also cope with the odd run and you prefer a laterally stiff sole unit.
|
Snug fit, good grip and stability, all round rand protection, green
bits.
Cushioning a
little firm for all-day hardness, some will prefer a more flexible sole
unit.
|
Know more or want to?
can mail
us direct, ask
Richard Gear or try
a posting to our
gear
forum.